Ontario

Midwest Cover Crops Council (MCCC-129)

University of Guelph (SAG-FS-21-003)


This publication is intended to provide a starting point for farmers who are new to growing cover crops. With experience, many farmers fine-tune the use of cover crops for their systems.

Introduction

This recipe provides an introductory approach to integrating a cover crop mix of oats and radish after an early harvested processing vegetable, such as snap beans, cucumbers, peas, or early tomatoes. Both oat and radish can successfully establish in late summer to early fall and usually winter-kill. It is a low-risk mix that will help control tough perennial or winter annual weeds, minimize erosion, build soil structure, reduce compaction, and add some extra diversity to your rotation.

Planning and Preparation
  • Planning—Keep it simple. Start small on one field. Be timely. Prioritize cover crop management based on your goals. Fine-tune the recipe for your needs over time. If cole or other Brassica crops are grown in the rotation, it’s best to use peas instead of radish in order to avoid a buildup of pest pressures.
  • Vegetable planting—No modifications to the crop are required for the successful use of cover crops.
  • Residual herbicides—Oats and radish are tolerant of most herbicides applied to the vegetable crop in-season.
  • Seed purchase—Seed supplies and prices can vary depending on the time of year; it is good practice to order seed early (before harvest). The Ontario Ministry of Agriculture, Food and Rural Affairs (OMAFRA) has compiled a list of reputable cover crop seed suppliers (see Resources).
  • Fertility or manure—Fall fertilizer incorporation can damage the living cover crop. Plan for fertilizer or manure application before planting the cover crop or after the cover crop winter-kills, or use a low-disturbance injection method to minimize damage.
Summer/Fall Work
  • Vegetable harvest—Ensure that crop residues are spread evenly. Some light tillage can help with residue breakdown under the cover crop canopy. If the field was heavily tracked or rutted during harvest, level the field with tillage. For early harvested vegetables, such as peas, waiting a few weeks may allow for breakdown of crop residues and improve the seedbed for the cover crop.
  • Timing of planting—Plant the oat-radish mix between mid-August and mid-September. Planting radish prior to August is not recommended as it will often result in flowering and seed production instead of quick coverage and biomass accumulation.
  • Seeding rate in oats/radish mix—Mix seeds prior to planting. For oat, use 30–60 lbs/acre. Use the higher end of that range if manure application and/or erosion control are your goals; the lower end of that range should be sufficient if you want to build soil structure or have land covered. Radish should be seeded at no more than 2 lbs/acre if drilling and 2–3 lbs/acre if broadcasting.
  • Planting method—An oat-radish cover crop can be planted with a drill at a depth of 0.50–0.75 inch or broadcast with light incorporation. An oat-radish cover crop can also be mixed with dry fertilizer, applied with a spreader, and then lightly incorporated.
  • Fertility or liming—After most processing vegetables, extra nitrogen (manure or fertilizer) is not required. Use a current soil test (no older than four years) to determine lime or phosphorus and potassium nutrient requirements for the next year’s crop. Fertilizers can be applied at the same time as seeding to reduce costs. Lime should be applied separately as it will need to be incorporated deeper than the cover crop seed.
  • Manure—Up to 4 tonnes/acre of solid manure or litter can be surface-broadcast to growing oats and radish provided it is evenly distributed; otherwise it should be done prior to seeding. If injecting manure, low-disturbance injectors are available that will minimize damage to oats and radish. See Use and Management of Manure and Other Organic and/or Prescribed Materials in Resources for more information about recommended practices in Ontario.
  • Tillage or no-tillage—The cover crop can be established with no tillage, but light tillage can help suppress weeds to allow the cover crop to get established. Fall full-width tillage is not necessary and minimizes the benefits of soil cover over the winter.
Figure 1. This shows a well-established oat-radish mix. Radish is very competitive; do not use more than 2 lbs/acre if drilling and 2-3 lbs/acre if broadcasting in a mix with oats. (OMAFRA)
Spring Work
  • Fertilizer—No modifications to a typical fertilization program are required after an oat-radish cover crop mix.
  • Termination—Both oats and radish should winter-kill. However, mild winters and good snow cover sometimes allow overwintering of radish. If this occurs, it is easily terminated with a typical pre-plant herbicide application for broadleaf weeds.
  • Direct-seeding—Most modern planters are fully capable of planting corn, soybean, or vegetables into the expected low spring-residue cover from an oat-radish mix. But if direct-sowing vegetables, consider strip or zone tillage to prepare the seedbed. Check planting depth and seed furrow closure shortly after beginning to plant as some adjustments may be needed.
  • Transplanting—Scout fields early and adjust timing of operations accordingly. An oat-radish cover crop reduces winter annuals, such as chickweed, so tillage for weed control may not be necessary. Cover crop residues can slow the early spring drying and warming of the soil, particularly for early crops such as cole crops; it is unlikely to affect warm-season crops such as tomatoes.
  • Scouting—After planting, scout for crop emergence and population. Additionally, scout for weeds since cover crop residue on the soil surface can delay the emergence of annual weeds, which may delay the application of post-emergence herbicides.
Resources

Cover Crop Selector Tool —available from Midwest Cover Crops Council

Best Management Practices: Winter Cover Crops (OMAFRA)

Cover Crop Seed Suppliers (OMAFRA)

Use and Management of Manure and Other Organic and/or Prescribed Materials (Ontario Soil and Crop Improvement Association Infosheet #17)

Guide to Weed Control: Hort Crops (OMAFRA publication 75B)

Vegetable Crop Protection Guide (OMAFRA publication 838)

Vegetable Production Information—Commercial Vegetable Production (OMAFRA)

Authors

Jordan Grigg, Cameron Ogilvie, and Laura Van Eerd, University of Guelph; and Anne Verhallen, OMAFRA (Note: This publication was adapted with consent from MCCC under a joint project to produce customized introductory guidance about cover crops for all member states/provinces.)

Reviewers and Contributors

Kris McNaughton, University of Guelph, and Elaine Roddy, OMAFRA

The Midwest Cover Crops Council (midwestcovercrops.org) aims to facilitate widespread adoption of cover crops throughout the U.S. Midwest and Ontario by providing educational/outreach resources and programs, conducting new research, and communicating about cover crops to the public.
Funding for this project was provided by McKnight Foundation.

November 2021

The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or a part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410 or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer. ©2021 by MCCC. All rights reserved.

Share

Midwest Cover Crops Council (MCCC-128)

University of Guelph (SAG-FS-21-003)


This publication is intended to provide a starting point for farmers who are new to growing cover crops. With experience, many farmers fine-tune the use of cover crops for their systems.

Introduction

This recipe provides an introductory approach to integrating a cover crop mix of oats and radish after wheat harvest going to corn or soybean the next year. Since both oat and radish can be sown after wheat harvest and usually winter-kill, it is a low-risk mix that will help control tough perennial weeds, minimize erosion, build soil structure, reduce compaction, and add some extra diversity to your rotation.

Planning and Preparation
  • Planning—Keep it simple. Start small on one field. Be timely. Prioritize cover crop management based on your goals. Fine-tune the recipe for your needs over time.
  • Wheat variety and planting—No modifications to wheat crop are required for the successful use of cover crops after wheat harvest.
  • Residual wheat herbicides—Oats and radish are tolerant of most herbicides applied to the wheat crop in-season before flag leaf emergence.
  • Seed purchase—Seed supplies and prices can vary depending on the time of year; it is good practice to order seed early (before wheat harvest). The ­Ontario Ministry of Agriculture, Food and Rural Affairs (OMAFRA) has compiled a list of reputable cover crop seed suppliers (see Resources).
Summer/Fall Work
  • Wheat harvest—Ensure that straw and chaff are spread evenly. If residue levels are high or variable, consider removing the straw or using light tillage to improve seed-to-soil contact for the cover crop. However, light tillage will tend to synchronize volunteer wheat and cover crop emergence. Weeds can be sprayed after wheat harvest but before cover crop emergence.
  • Timing of planting—Plant the oat-radish mix up to late August after wheat harvest. Planting radish prior to August is not recommended as it may result in flowering and seed production instead of quick coverage and biomass accumulation.
  • Planting method—An oat-radish cover crop can be drilled at a depth of 0.50–0.75 inch or broadcast with light incorporation. If broadcasting, adjust to a half lap for spinner spreaders or use an airflow spreader to ensure even distribution of seeds. An oat-radish cover crop can be mixed and applied with P and K fertilizer for the following corn or soybean crop, and then lightly incorporated.
  • Seeding rate of oat and radish—Mix seeds prior to planting. For oat, use 30–60 lbs/acre. Use the higher end of that range if manure application and/or erosion control are your goals; use the lower end of that range if you are hoping to build soil structure or have land covered. Radish should be seeded at no more than 2 lbs/acre if drilling and 2–3 lbs/acre if broadcasting.
  • Tillage or no-tillage—Full-width tillage is not necessary and minimizes the benefits of soil cover over the winter. By the spring, there is typically very little residue (Figure 1).
  • Fertility or liming—Use a current soil test (no older than four years) to determine lime or nutrient requirements for the next year’s crop. Lime and fertilizers can be applied at the same time as seeding to reduce costs. Lime will need to be incorporated more deeply.
  • Manure—Up to 4 tonnes/acre of solid manure or litter can be surface-broadcast to growing oats and radish provided it is evenly distributed; otherwise it should be done prior to seeding. If injecting manure, low-disturbance injectors are available that will minimize damage to oats and radish. See Use and Management of Manure and Other Organic and/or Prescribed Materials in Resources for more information about recommended practices in Ontario.
Figure 1: Pictured is the spring residue of an oat and radish cover crop mix, which will usually winter-kill. If concerned about early spring warming and drying, select seeding rates on the lower end of the suggested range (OMAFRA).
Spring Work
  • Fertilizer—No modifications to a typical fertilizer program are required for planting corn or soybeans after an oat-radish cover crop mix.
  • Termination—Both oats and radish should winter-kill. However, mild winters and good snow cover sometimes allow overwintering of radish. If this occurs, it is easily terminated with typical pre-plant herbicide application for broadleaf weeds. Volunteer winter wheat may also be present and require termination.
  • Corn or soybean planting—It is usually best to no-till cash crops into the dead/dry or standing oat-radish residue. Almost all modern planters and drills are fully capable of planting corn into the expected low residues from an oat-radish mix. If there is a lot of residue, soils may be slower to dry and warm, which may delay planting. Check planting depth and seed furrow closure shortly after beginning to plant into the cover crop residue (Figure 1) as some adjustments may be needed. Based on scouting and field history, consider using treated seed to control insects and diseases, but oat-radish mix is not expected to increase pest pressure.
  • Scouting—After corn or soybean planting, scout for crop emergence and population. Additionally, scout for weeds since cover crop residue can delay the emergence of annual weeds, which may delay the application of any contact post-emergence herbicides.
Resources

Cover Crop Seed Suppliers (OMAFRA)

Best Management Practices: Winter Cover Crops (OMAFRA)

Agronomy Guide for Field Crops (OMAFRA publication 811)

Cover Crop Selector Tool —available from Midwest Cover Crops Council

Use and Management of Manure and Other Organic and/or Prescribed Materials (Ontario Soil and Crop Improvement Association Infosheet #17)

Authors

Jordan Grigg, Cameron Ogilvie, and Laura Van Eerd, University of Guelph; and Anne Verhallen, OMAFRA (Note: This publication was adapted with consent from MCCC under a joint project to produce customized introductory guidance about cover crops for all member states/provinces.)

Reviewers and Contributors

Joanna Follings, OMAFRA; David Hooker, University of Guelph; Tatianna Lozier, Upper Thames River Conservation Authority; Anne Vanasse, Université Laval; Marty Vermey, Grain Farmers of Ontario ­

The Midwest Cover Crops Council (midwestcovercrops.org) aims to facilitate widespread adoption of cover crops throughout the U.S. Midwest and Ontario by providing educational/outreach resources and programs, conducting new research, and communicating about cover crops to the public.
Funding for this project was provided by McKnight Foundation.

July 2021

The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or a part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410 or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer. ©2021 by MCCC. All rights reserved.

Share

Midwest Cover Crops Council (MCCC-127)

University of Guelph (SAG-FS-21-001)


This publication is intended to provide a starting point for farmers who are new to growing cover crops. With experience, farmers may fine-tune the use of cover crops for their systems.

Introduction

The following recipe provides an introductory approach to underseeding a red clover cover crop into winter wheat prior to corn. Adding red clover to a wheat-corn-soybean rotation can improve corn and soybean yields, promote better soil, and provide a nitrogen credit, depending on growth and tillage. With good management, these potential benefits make a red clover cover crop worth investing in.

Planning and Preparation
  • Planning—Start small with one field. Prioritize cover crop management based on your goals. Avoid fields with a history of poor drainage, water ponding, or fertility issues.
  • Wheat variety and planting—No modifications to wheat variety and planting are required for the successful adoption of a red clover cover crop.
  • Winter wheat herbicides—Bromoxynil or MCPA are registered for wheat underseeded with red clover but with specific precautions to avoid injury. See Table 7-3, Herbicide Treatment Rates for Cereals, in Guide to Weed Control: Field Crops (see Resources).
  • Tillage or no-tillage—Red clover establishment may be more challenging in no-till systems. In fields with high residue, light tillage prior to wheat planting may improve seed-soil contact and establishment of red clover.
  • Fertility or liming—No changes are needed if applying P, K, lime, or manure in the fall before wheat planting.
  • Seed purchase—Seed prices can vary depending on the time of year; therefore, it is best to order seeds early. Red clover seed is readily available across Ontario. (See Cover Crop Seed Suppliers in Resources.)
  • Variety selection—Ontario growers can choose between double-cut or single-cut varieties, or a mix of both. Single-cut types tend to have less top growth than double-cut types. In thin wheat stands, choose single-cut; otherwise the height of double-cut may pose an issue when combining. Single-cut varieties are slightly more drought tolerant and may be favored in strip-till or no-till systems.
Late-Winter Work
  • Planting method and timing—Red clover can be broadcast into winter wheat just before green-up while the ground is still frozen and fields are fit to drive on. The freeze-thaw action will work the seeds into the ground. (See Underseeding Red Clover into Winter Wheat in Resources.)
  • Seeding rate for red clover—Broadcast red clover at a rate of 7–9 lbs/acre. For more information, see Agronomy Guide for Field Crops (in Resources).
Summer Work
  • Scouting—Look for red clover plants to have about 5 leaves during late May before the dry summer period.
  • Wheat harvest—Harvest wheat at the normal time. The red clover will continue growing until terminated.
Figure 1. After wheat harvest, clover stands that appear thin in spots, such as the one pictured, can still be very successful. Mowing can help suppress weeds while the clover becomes more established. (OMAFRA)
Post-Wheat Harvest Work
  • Evaluating a clover stand—The goal is a uniform stand of at least 3 to 4 plants per square foot. Clover stands may seem to disappear under hot and dry conditions immediately before wheat harvest but will often recover within one to two weeks.
  • Filling in patches—If red clover stands are inconsistent (Figure 1), red clover or crimson clover can either be drilled or broadcast into gaps. Alternatively, forage pea, an oat-pea mix or an oat-radish mix (see After Wheat, Going to Corn or Soybean in Resources) can be planted to suppress weeds.
  • Mowing—Scout and clip or mow the field before common ragweed or other weeds go to seed (Figure 1).
  • Termination—Significant root mass accumulates in the month of October, so it is best to delay termination as late as possible. There are two main methods:
    • Herbicide—Terminate red clover in the fall when it is actively growing and herbicides are most effective. Spring termination is less successful. (See page 5 of the Guide to Weed Control: Field Crops.)
    • Tillage—Red clover can be terminated using a moldboard plow in the fall or spring. Some growers do not plow and will follow up their herbicide termination with some tillage, but disc ripping will not effectively terminate red clover on its own.
Spring Work
  • Fertilizer—The nitrogen application rate to corn can be reduced by 73 lbs/acre for plowed clover and by 60 lbs/acre in a no-till system. (See page 24 of the Agronomy Guide for Field Crops.)
  • Corn planting—Check planting depth and seed furrow closure shortly after beginning to plant into the cover crop residue as usually some adjustments are needed.
  • Scouting—After corn planting, scout for crop emergence and population. Slug damage may occur if the clover was not tilled. Additionally, scout for red clover escapes and weeds since cover crop residue can often delay the emergence of annual weeds, which may delay the application of any post-emergence herbicides.
Resources

Cover Crop Selector Tool — available from Midwest Cover Crops Council

Guide to Weed Control: Field Crops (OMAFRA publication 75A)

Cover Crop Seed Suppliers (OMAFRA)

Underseeding Red Clover into Winter Wheat (Field Crop News, OMAFRA)

Agronomy Guide for Field Crops (OMAFRA publication 811)

After Wheat, Going to Corn or Soybean: Use an Oat-Radish Mix (Ontario Cover Crop Recipe Series, MCCC-128/SAG-FS-21-002)—available from Midwest Cover Crops Council, Cover Crop Recipes

Fall Control of a Red Clover Cover Crop (Field Crop News, OMAFRA)

Authors

Jordan Grigg, Cameron Ogilvie, and Laura Van Eerd, University of Guelph; Anne Verhallen, OMAFRA (Note: This publication was adapted with consent from MCCC under a joint project to produce customized introductory guidance about cover crops for all member states/provinces.)

Reviewers and Contributors

Joanna Follings, OMAFRA; David Hooker, University of Guelph; Tatianna Lozier, Upper Thames River Conservation Authority; Anne Vanasse, Université Laval; Marty Vermey, Grain Farmers of Ontario

The Midwest Cover Crops Council (www.https://www.midwestcovercrops.org) aims to facilitate widespread adoption of cover crops throughout the U.S. Midwest and Ontario by providing educational/outreach resources and programs, conducting new research, and communicating about cover crops to the public.
Funding for this project was provided by McKnight Foundation.

July 2021

The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or a part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410 or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer. ©2021 by MCCC. All rights reserved.

Share

Midwest Cover Crops Council (MCCC-125)

University of Guelph (SAG-FS-20-001)


This publication is intended to provide a starting point for farmers who are new to growing cover crops. With experience, farmers may fine-tune the use of cover crops for their systems.

Introduction

The following recipe provides an introductory approach to integrating a cover crop after corn silage harvest and before planting soybean as the next crop.

Planning and Preparation
  • Planning—Read about cover crops. Go to field days. Start small. Be timely. Prioritize management based on purpose and objectives.
  • Residual corn herbicides—Read the product label to identify any recropping restrictions for planting fall rye (Secale cereale L.) after silage corn harvest. Rye should not be grazed or harvested for forage unless product labels explicitly permit the use of an underseeded, treated crop as feed or the recropping restrictions are followed. (See Table 4-4, Herbicide Crop Rotation and Soil pH Restrictions—Field Crops, in Publication 75A, Guide to Weed Control: Field Crops in Resources.)
  • Seed purchase—Order rye seed early, usually by early summer. Use good quality seed from a reputable seed dealer. Bin-run seed doesn’t have guaranteed germination and may come with unwanted weed seeds. Consider doing a germination test before planting and adjust seeding rates accordingly.

Fall Work

  • Fall manure—It generally works best to plant cover crops following manure application via injection or surface application and incorporation. Nevertheless, so long as soil conditions are fit, manure can be applied by dragline or tanker once rye has passed the 2-3 leaf stage. This is not likely to damage the rye since the growing point remains below the ground in the fall.
  • Tillage or no-tillage—Generally, it is easier to integrate cover crops into no-tillage or strip-tillage systems. If tillage is necessary to incorporate manure or smooth the seedbed after corn silage harvest, it should take place prior to rye seeding.
  • Timing of planting—Plant rye as soon as possible after silage corn harvest and at least two weeks before the average hard frost date (-2°C). If planting later than mid-October, double the seeding rate.
  • Seeding rate—Seed at a rate of 40–90 lbs/acre (assuming a germination rate of 85% or greater). Seeding rates should be increased by 50% if broadcasting and incorporating or be doubled if just broadcasting. If the rye will be grazed or harvested as a silage crop in the spring, use a rate of 100–170 lbs/acre.
  • Planting method—Drill to a depth of 1–1.5 inches or broadcast with shallow incorporation to less than 1.5 inches. Aerial or other broadcast seeding is an option for earlier establishment into standing corn with some risk of poor or inconsistent establishment. Overly wet or dry conditions after aerial seeding or presence of slugs will limit success.
  • Other fall operations—Use a current soil test (no older than four years) to determine lime or nutrient requirements for next year’s crop. If needed, thoroughly incorporate before seeding the rye cover crop.
Rye on May 2, 2019, drilled the previous fall after corn silage at the Elora Crops Research Station (Jake Munroe)
Rye on May 2, 2019, drilled the previous fall after corn silage at the Elora Crops Research Station (Jake Munroe)
Spring Work
  • Termination timing—Terminate the rye in the spring when plants are 6 to 12 inches tall and actively growing or about two weeks before planting soybeans—whichever comes first. In a wet or windy spring, be ready to take advantage of any break in the weather and/or use low axle weight sprayers.
  • Termination herbicide—Rye can be terminated with glyphosate after the rye begins growing in the spring (see Publication 75A, Guide to Weed Control: Field Crops in Resources). Effectiveness and speed of termination improves if rye is rapidly growing and air temperatures are warmer (>15°C). Larger rye, rye past the boot stage, or rye sprayed during cooler weather can be more difficult to kill, may require higher glyphosate rates, and will die more slowly.
  • Option to harvest rye as a silage crop—Some growers may be interested in harvesting rye as an additional silage crop. Make sure all herbicide restrictions are followed. Also, this will typically delay the planting date for the next crop, but any fall-applied nutrients can be counted toward the rye crop in nutrient management planning. (See Resources for additional information on rye forage management.) Be sure to control rye regrowth.
  • Soybean planting—Almost all modern planters and drills, with some modifications, are capable of planting soybean into a rye cover crop. Check that soybean seed is planted into moisture and the slot is closed shortly after beginning to plant; usually some adjustments are needed.
  • Scouting—After planting, scout for soybean emergence, stand establishment, and weed control. Rye residue can delay annual weed emergence, which may shift the timing of post-emergence herbicides.
Resources

Cover Crop Selector Tool —available from Midwest Cover Crops Council

Publication 811, Agronomy Guide for Field Crops (OMAFRA)

Publication 75A, Guide to Weed Control: Field Crops (OMAFRA)

Cover Crops (OMAFRA web publication)

Double Cropping Fall Rye for Extra Forage (OMAFRA web publication)

Get a Jump on Early Spring Forage (OMAFRA web publication)

Authors

Cameron Ogilvie, University of Guelph; Jake Munroe, OMAFRA; Mike Cowbrough, OMAFRA; Christine O’Reilly, OMAFRA; Laura Van Eerd, University of Guelph; Anne Verhallen, OMAFRA

Reviewers and Contributors

Dale Cowan, AGRIS Co-operative Ltd.; David Hooker, University of Guelph; Peter Johnson, Real Agriculture; Darren Robinson, University of Guelph; Peter Sikkema, University of Guelph; and François Tardif, University of Guelph

The Midwest Cover Crops Council (www.https://www.midwestcovercrops.org) aims to facilitate widespread adoption of cover crops throughout the U.S. Midwest and Ontario by providing educational/outreach resources and programs, conducting new research, and communicating about cover crops to the public.
Funding for this project was provided by McKnight Foundation.

August 2020

The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or a part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410 or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer. ©2020 by MCCC. All rights reserved.

Share

Subscribe to our ListServ

Sign up to receive the latest MCCC news and updates!